Solar PV mounting molding equipment 2.1 Equipment Technical Requirements Technical requirements: 2.1.1 equipment footprint: 25 × 3.5 × 5 (length × width × height) meters. 2.1.2 Equipment Feed direction: to be determined. 2.1.3 voltage parameters 380,50 Hz, 3 phase. 2.1.4 Gas source: Flow of 0.5m3 / min; pressure of 0.6MPa. 2.1.5 Hydraulic oil: 46 # hydraulic oil. 2.1.6 gear oil: 18 # hypoid gear oil. 2.2 Main technical parameters 2.2.1 rolled strip width: ≤ 200 mm 2.2.2 rolled strip thickness: 2.0 ~ 2.5 mm 2.2.3 rolled strip material: low carbon steel 2.2.4 Production speed: full range punching speed is about 9 m / min 2.2.4 rolling workpiece length :2000-6000 mm 2.2.5 Equipment Total installed capacity: approximately 38.5KW. 3 rolled products range 3.1 stamping / forming units can be rolled thickness 2.0 ~ 2.5mm C-sections. 3.2 Rolled Products Size according to customer drawings or samples to design and production 4. Supply and services 4.1 provisions of the equipment supply contract range (see Table 2), Seller warrants that the provision of equipment for the new, mature , technical performance, safety and reliability of the complete and equipment meet the technical requirements of the function. Table II: C-automatic punching / forming equipment scope of supply No. Name Specifications Model number of motors and power (KW) Note 1 discharge leveling machine MT-300 1 Taiwan 32 Servo Feeder NCF-300 1 Taiwan 3 3 JF21 punch punching requirements based on the actual tonnage of a given set of punch die set of 5 7.5 4 host arch forming a gear box 226 sets of hydraulic cutting a discharge station 37 sets SL-300X4000 1 station 8 electrical control system sets of components Main brands: Number Name Remarks 1 inverter manufacturer Mitsubishi Mitsubishi LCD 2 3 electrical low voltage control components Schneider, Siemens and other brands of hydraulic components manufacturers four domestic brands or equivalent brand Harbin Bearing 5 6 reducer Changzhou Guomao Reducer Group Co., Ltd., or equivalent brand