Cable tray forming machine equipment Introduction Suzhou Tianyuan Technology Co., Ltd. is the most professional manufacturer of Jiangsu Province and manufacture of cable tray forming machine equipment technical requirements for equipment manufacturers technical conditions: equipment footprint: 30 × 3.5 × 2.5 (L × W × H ) meters. Equipment feeding direction: left right out (to be confirmed). Voltage parameters 380,50 Hz, 3 phase. Gas source: Flow of 0.5m3 / min; pressure is 0-0.7MPa. Hydraulic oil: 46 # hydraulic oil. Gear oil: 18 # hypoid gear oil. Main technical parameters of the rolling strip width :200-960 mm rolled strip thickness: 0.8 ~ 2.0 mm rolled strip material: Q235 cold rolled strip / hot dip galvanized steel punching Forming speed: 6-8m / minute rolling workpiece length :2000-6000 mm equipment installed capacity: approximately 34.5KW. Rolled product range of the stamping unit can be rolled maximum thickness of 2.5mm cable tray, product width from 100 to 600mm, height from 50 to 150mm, different specifications of steel cable tray products. The scope of supply and services to the terms of the scope of the equipment supply contract (see Table I), Seller warrants that the provision of equipment for the new, advanced and mature, complete, safe and reliable, and the technical performance of the equipment, the function meet the technical criteria requirements. Table I: cable tray cantilever automatic molding equipment scope of supply No. Name Quantity Remark 1 passive discharge machine 2 without power leveling, punching a five-roller leveler and hydraulic four-post rack 3 die punching a combination 5 die cut type hydraulic cutting molding hosts 118-22 6 passes, four 5.5kw inverter motor thick 1-2 mm, roll material: GCr15 7 discharge station a drum-type electric control cabinet 8 1 PLC control cable tray forming machine Is technology products Suzhou Tianyuan Equipment Technology Limited.